金沙娱乐场官方网-澳门金沙会官网-金沙集团股价实情信息最新

首頁(yè)» 往期文章» 2014» Issue 3» 石油工程與機(jī)械

Petroleum Science >2014,??Issue 3:??391-400 DOI: https://doi.org/10.1007/s12182-014-0353-2

Numerical analysis of the effects of downhole dynamic conditions on formation testing while drilling Open?Access

文章信息

pdf下載
作者：DI Dejia,TAO Guo,WANG Bing,CHEN Xu and SUN Jiming
作者單位：

State Key Laboratory of Petroleum Resources and Prospecting, China University of Petroleum, Beijing 102249, China SINOPEC Research Institute of Petroleum Engineering, Beijing 100101, China;State Key Laboratory of Petroleum Resources and Prospecting, China University of Petroleum, Beijing 102249, China Departments of Petroleum Geosciences & Engineering, The Petroleum Institute, Abu Dhabi, UAE;State Key Laboratory of Petroleum Resources and Prospecting, China University of Petroleum, Beijing 102249, China;State Key Laboratory of Petroleum Resources and Prospecting, China University of Petroleum, Beijing 102249, China;State Key Laboratory of Petroleum Resources and Prospecting, China University of Petroleum, Beijing 102249, China

投稿時(shí)間：2013-08-15
引用方式：Di, D., Tao, G., Wang, B. et al. Pet. Sci. (2014) 11: 391. https://doi.org/10.1007/s12182-014-0353-2

文章摘要

Formation testing while drilling is an innovative technique that is replacing conventional pressure testing in which the fluid sampling is conducted in a relatively short time following the drilling. At this time, mud invasion has just started, mudcake has not formed entirely and the formation pressure is not stable. Therefore, it is important to study the influence of the downhole dynamic environment on pressure testing and fluid sampling. This paper applies an oil-water two phase finite element model to study the influence of mudcake quality and mud filtrate invasion on supercharge pressure, pretest and sampling in the reservoirs of different permeability. However, the study is only for the cases with water based mud in the wellbore. The results illustrate that the mudcake quality has a significant influence on the supercharge pressure and fluid sampling, while the level of mud filtrate invasion has a strong impact on pressure testing and sampling. In addition, in-situ formation pressure testing is more difficult in low permeability reservoirs as the mud filtrate invasion is deeper and therefore degrades the quality of fluid sampling. Finally, a field example from an oil field on the Alaskan North Slope is presented to validate the numerical studies of the effects of downhole dynamic conditions on formation testing while drilling.

關(guān)鍵詞

    Formation testing while drilling, formation supercharge, pressure testing, fluid sampling, finite element method, mudcake, filtrate invasion