Petroleum Science >2014,??Issue 2:??318-322 DOI: https://doi.org/10.1007/s12182-014-0346-1
A handy method for estimating the particle concentration distribution in FCC risers using a gamma-ray transmission technique Open?Access
文章信息
作者：Liu Xiaocheng,Wei Yaodong and Song Jianfei
作者單位：
State Key Laboratory of Heavy Oil Processing, China University of Petroleum, Beijing 102249, China;State Key Laboratory of Heavy Oil Processing, China University of Petroleum, Beijing 102249, China;State Key Laboratory of Heavy Oil Processing, China University of Petroleum, Beijing 102249, China
投稿時(shí)間：2013-12-09
引用方式：Liu, X., Wei, Y. & Song, J. Pet. Sci. (2014) 11: 318. https://doi.org/10.1007/s12182-014-0346-1
文章摘要
A handy gamma-ray transmission method for estimating the particle concentration distribution in a fluid catalytic cracking (FCC) riser is proposed. The method is based on an empirical correlation Open image in new window, which has only one unknown parameter Open image in new window, hence only one single-beam experimental result is enough to estimate the particle concentration distribution in the riser. In order to verify the feasibility of this method, the particle concentrations of three cross-sections of the laboratory riser were measured and the distribution profiles were compared with those reported in the literature. Furthermore, by comparing other gamma-ray function methods applied in the measurement of risers, this method has distinct advantages, such as the device is simple and has no moving parts, the measurement is rapid, and the safety is high because only one gamma-ray beam is used. Therefore, the method has promising applications in estimating particle concentrations or monitoring operation conditions of risers.
關(guān)鍵詞
-
Gamma-ray, riser, FCC catalyst, concentration measurement