Petroleum Science >2013,??Issue 3:??421-430 DOI: https://doi.org/10.1007/s12182-013-0291-4
An alternative treatment process for upgrade ofpetroleum refinery wastewater using electrocoagulation Open?Access
文章信息
作者：Dhorgham Skban Ibrahim,Mohan Lathalakshmi,Appusamy Muthukrishnaraj and Natesan Balasubramanian1
作者單位：
Department of Chemical Engineering, AC Tech Campus, Anna University, Chennai 600025, India 2 Department of Petroleum Engineering, College of Engineering, University of Baghdad, Iraq;1 Department of Chemical Engineering, AC Tech Campus, Anna University, Chennai 600025, India;1 Department of Chemical Engineering, AC Tech Campus, Anna University, Chennai 600025, India;1 Department of Chemical Engineering, AC Tech Campus, Anna University, Chennai 600025, India
投稿時(shí)間：2012-10-27
引用方式：Ibrahim, D.S., Lathalakshmi, M., Muthukrishnaraj, A. et al. Pet. Sci. (2013) 10: 421. https://doi.org/10.1007/s12182-013-0291-4
文章摘要
An electrocoagulation treatment process was developed for treatment and upgrade of
petroleum refinery effluent (wastewater), instead of the conventional methods, which can consume higher
amounts of chemicals and produce larger amounts of sludge. The effect of the operation parameters, such
as current density, initial pH, anode material, anode dissolution, energy consumption and electrolysis
time, on treatment efficiency was investigated. The experimental results showed that the effluent can be
effectively treated under optimal conditions. Fourier transform infrared (FTIR) analysis of the effluent,
and scanning electron microscopy (SEM) coupled with energy dispersive analysis of X-rays (EDAX)
of the sludge produced, revealed that the unwanted pollutants can be eliminated. The electrocoagulation
treatment process was assessed by using the removal efficiency of chemical oxygen demand (COD), total
suspended solids (TSS), and the general physicochemical characteristics of wastewater, and the results
showed that the electrocoagulation is an efficient process for recycling of petroleum wastewater; it is
faster and provides better quality of treated water than the conventional methods.
petroleum refinery effluent (wastewater), instead of the conventional methods, which can consume higher
amounts of chemicals and produce larger amounts of sludge. The effect of the operation parameters, such
as current density, initial pH, anode material, anode dissolution, energy consumption and electrolysis
time, on treatment efficiency was investigated. The experimental results showed that the effluent can be
effectively treated under optimal conditions. Fourier transform infrared (FTIR) analysis of the effluent,
and scanning electron microscopy (SEM) coupled with energy dispersive analysis of X-rays (EDAX)
of the sludge produced, revealed that the unwanted pollutants can be eliminated. The electrocoagulation
treatment process was assessed by using the removal efficiency of chemical oxygen demand (COD), total
suspended solids (TSS), and the general physicochemical characteristics of wastewater, and the results
showed that the electrocoagulation is an efficient process for recycling of petroleum wastewater; it is
faster and provides better quality of treated water than the conventional methods.
關(guān)鍵詞
-
COD/TSS reduction, electrocoagulation, petroleum refinery effluent, recycle, sludgeanalysis.