Petroleum Science >2009,??Issue 4:??451-463 DOI: https://doi.org/10.1007/s12182-009-0069-x
Drilling cost optimization in a hydrocarbon field by combination of comparative and mathematical methods Open?Access
文章信息
作者：A. Bahari and A. Baradaran Seyed
作者單位：
Iranian Central Oil Fields Company (ICOFC), Esfandiari St., Valiasr Ave., Tehran, Iran;Behinkav Zharfa Consulting Engineers, No. 45, Block 18, Phase 2, Ekbatan, Tehran, Iran
投稿時(shí)間：2009-03-08
引用方式：Bahari, A. & Baradaran Seyed, A. Pet. Sci. (2009) 6: 451. https://doi.org/10.1007/s12182-009-0069-x
文章摘要
In drilling operation, a large saving in time and money would be achieved by reducing the drilling time, since some of the costs are time-dependent. Drilling time could be minimized by raising the penetration rate. In the comparative optimization method, by using the records of the first drilled wells and comparing the criteria like penetration rate, cost per foot and specific energy, the drilling parameters of the next wells being drilled can be optimized in each depth interval. In the mathematical optimization technique, some numerical equations to model the penetration rate, bit wear rate and hydraulics would be used to minimize the drilling cost and time as much as possible and improve the results of the primary comparative optimization.
In this research, as a case study the Iranian Khangiran gas field has been evaluated to optimize the drilling costs. A combination of the mentioned optimization techniques resulted in an optimal well which reduced the drilling time and cost considerably in comparison with the wells already drilled.
In this research, as a case study the Iranian Khangiran gas field has been evaluated to optimize the drilling costs. A combination of the mentioned optimization techniques resulted in an optimal well which reduced the drilling time and cost considerably in comparison with the wells already drilled.
關(guān)鍵詞
-
Optimization, cost per foot, penetration rate, drilling performance